16000 Appliances Hardware
16000 Appliances Getting Started Guide | 41
To install the power cable restraint:
1.
If a power cable is connected to the power supply inlet, disconnect it.
2.
Find the restraint strip slot on top of the power supply inlet.
3.
Make sure that the cable loop on the restraint faces the power supply inlet.
4.
Insert the restraint strip anchor into the slot until it snaps and locks.
5.
Connect the power cable to the power supply inlet.
6.
Pull the restraint tab to the side to move the cable loop on the restraint strip.
7.
Move the cable loop until you can put it around the power cable as shown in the next figure.
8.
Insert the open side of the cable loop into the loop slot until it is tight against the power cable.
9.
Make sure the cable loop is secured and the power cable cannot be removed.
