Check corporation 2 Series, Руководство по установке

Страница: 6 / 20

Page 6
Installation Instructions
Heating Element Information
Mandatory Element E26201
Has a temperature probe
19”
Optional Element E06201
9”
Product Specifications
 12v automotive system ( 11 – 15 volts )
 Maximum power requirements
77W (5.6A @ 13.8V)
 Temperature range measured at seat surface during normal operation **
High 110°F (+/- 3 °F) or 43°C
Low 103°F (+/- 3 °F) or 39°C
 Heating elements meet FMVSS 302 flammability requirements
 Connectors are indexed to prevent improper mating, including a quick disconnect for the
switch

Cushion element could be cut as short as 120mm (4 3/4 inches). The back could be cut to
any size. But there is no heat in the area from the cut opening to Buss bar at each side.
Cushion element works without a back element.
** Performance varies with seat materials used and the density and amount of sew foam
between the heating elements and the surface of the seat.
19”
9”