Checchi & Magli WOLF COMPACT/3, Руководство по эксплуатации и обслуживанию

Страница: 68 / 174

UN41 0122BM
A
A
B
D
C
C
C
English language Use and maintenance
30
INFORMATION CONCERNING REPLACEMENTS
8
Safety advice concerning replacements
When replacing worn or damaged parts, original
spares must always be used.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
Changing and replacing the drilling cups
The dispenser can have up to six drilling cups fitted on
it.
Caution
To prevent damage to the transplant unit transmis-
sion, use the driving wheel to rotate the dispenser.
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Unscrew the screws (A).
3) Remove the casing (B).
4) Unscrew the screws (C) on each drilling cup (D) and
remove it.
Set up the drilling cup control disk and any phasing
units required (see “Drilling cups arrangement”).
5) Fit the cups in the housings.
6) Tighten the screws (C) on each drilling cup.
7) Fit the casing (B) and tighten the screws (A).
8) Lower the work vehicle onto the ground.