Checchi & Magli WOLF COMPACT/3, Руководство по эксплуатации и обслуживанию

Страница: 65 / 174

English language Use and maintenance
27
MAINTENANCE INFORMATION
7
Maintenance advice
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
Maintenance schedule
To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-
turer is carried out.
Maintenance schedule
Cups cleaning
Clean the moving parts of the drilling cups to remove any product residues so that the cups can move freely.
Tyres check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Check tyres pressure and restore if necessary (see “Tech-
nical characteristics”). The pressure must be checked with the weight of the
work vehicle entirely on the ground and with nothing
and nobody on the work vehicle.
Cleaning the work vehicle
Clean the work vehicle with a high-pressure water jet
and, if necessary, with approved detergents.
The liquid used for washing could be hazardous for the
environment due to the presence of pollutants such as
detergents, oils, etc., therefore do not simply dump the wastewater; dispose of it in suitable areas equipped with
separation devices for the pollutants.
Dry with compressed air and lubricate the components
shown (see “Lubrication points diagram”).
Frequency Component Type of work Manual reference
Every hour
Dispencer Cleaning
Drilling cups Cleaning Drilling cup cleaning
Every day
Lift frame Inspection
Safety devices Inspection
Warning and hazard plates Inspection
Every 50 hours
Machine components Greasing
Nuts and bolts Tightening inspection
Every 150 hours Tyres Pressure check Pressure check