Technical Information
Page 14 of 44
6.
T
ECHNICAL
I
NFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. To maintain optimum
performance, clean the product at least twice a month. Note: Use and environmental conditions may
contribute to increasing the cleaning frequency.
To clean the product, follow the instructions below:
•
Unplug the product from power.
•
Wait until the product is cold.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
•
Clean the glass surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•
Softly wipe any dirt or grime to the outside edges of the glass surface.
•
Gently polish the glass surfaces until they are free of haze and lint.
Always dry the glass surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could damage it.
7.
T
ECHNICAL
S
PECIFICATIONS
Dimensions and Weight
Length
Width
Height
Weight
278 mm
290 mm
202 mm
4.2 kg
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
230 V, 50 Hz
Consumption
50 W
Operating
0.2 A
Fuse
T1A, 250 V
Power I/O
UK/Europe
Power Cord plug
Local plug
Light Source
Type
Power
Class 3B Laser Diodes
Varied (see below)
Quantity/Color
Power
Wavelength
1/Red
100 mW
638 nm
1/Green
80 mW
532 nm
1/Blue
300 mW
450 nm
Photo Optic
Parameter
Scanner Speed
Zoom angle
1~36º
25k
Thermal
Maximum External Temp.
Cooling System
104° F (40° C)
Fan
External Controller
I/O Connectors
Connector Type
Channel Range
(DMX) 3-pin XLR
Sockets
1~19
(ILDA) DB25
Serial
1~2
Ordering
Product Name
Item Code
UPC Code
Scorpion Scan 3D EU
10060537
781462208851
