Chauvet Q-Wash 575 Скачать руководство пользователя страница 19

Returns Procedure 

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. 

erchandise Authorization Number (RA #). Products 

HAUVET and request RA # prior to shipping the 

l number, serial number and a brief description of the cause 

re, any shipping damage resulting from inadequate 

. CHAUVET reserves the right to use its own discretion to 

uct(s). As a suggestion, proper UPS packing or double-boxing is always a safe 

te: 

If you are given an RA #, please include the following information on a piece of paper 

Claims 

refore the damage must be 

reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and 

Technical S

n (406 mm) 

Width ............................................................................................................................... 16 in (406 mm) 

............................................................................................................ 23 in (584 mm) 
............................................................................................................ 75.8 lbs (34 kg) 

 

 
 

...................................................................................... 1224W 

° - 

34

° 
°

 

 

Bulb ...............................................................................................................................HMI 575W Lamp 

 

ket 

........16 

 

ORDERING INFORMATION  

Q-Wash 575™..................................................................................................................... Q-WASH575 
 

WARRANTY INFORMATION 

Warranty .............................................................................................................. 2-year limited warranty 

Package must be clearly labeled with a Return M

 C

returned without an RA # will be refused. Call

fixture. Be prepared to provide the mode

for the return. Be sure to properly pack fixtu

packaging is the customer’s responsibility

repair or replace prod

method to use. 

No

inside the box: 

1) Your 

name 

2) Your 

address 

3) Your 

phone 

number 

4) 

The RA # 

5) 

A brief description of the symptoms 

Damage incurred in shipping is the responsibility of the shipper; the

submit claims with the shipper in the event that a fixture is damaged due to shipping.  Any other claim 

for items such as missing component/part, damage not related to shipping, and concealed damage, 

must be made within seven (7) days of receiving merchandise. 

pecifications 

WEIGHT & DIMENSIONS  

Length.............................................................................................................................. 16 i

Height ..................
Weight .................
 

POWER 

Operating Voltage (internally selectable) ....................................... 100V, 115V, 208V, 230V - 50/60 Hz
AC input plug ................................................................................................................... IEC 60320 C14 
Fuse....................................................................................................20mm Glass 15A 250V Fast Blow
Power consumption ........................................................................................................................ 720W
Inrush......................................................
 

PHOTO OPTIC 

Beam angle ................................................................................................................................ 26
Pan ................................................................................................................................................... 530
Tilt..................................................................................................................................................... 280

° 

Illuminance at 1m .................................................................................................... 3,430 fc (36,906 lux)
 

LAMPS 

CONTROL & PROGRAMMING 

Data input ................................................................................................ locking 3-pin XLR male socke
Data output ........................................................................................... locking 3-pin XLR female soc
Data pin configuration ..............................................................................pin 1 shield, pin 2 (-), pin 3 (+) 
Protocols........................................................................................................................ DMX-512 USITT 
DMX Channels .............................................................................................................................

Q-Wash 575 User Manual 

19 

2007-08-03/09:10

 

Содержание Q-Wash 575




















Отзывы: