Chauvet Q-Wash 575, Руководство пользователя

Страница: 18 / 19

Technical Support
d, FL 33020 (U.S.A.)
Support (Email): tech@chauvetlighting.com
Telephone: (954) 929-1115 - (Press 4)
Fax: (954) 929-5560 - (Attention:
Website: http://www.chauvetlig
PEN
re tion. Channels may be assigned in any manne A
fixture capable of receiving DMX 512 will require one or a number of sequential channels. The user
ust a es the first chan serv in the controller.
There are many different types of DMX controllable fixtures and they all may vary in the total number
a address should be planned in advance. Channels should
never f the fixtures w ng address is
set inc ty ing t same starting
address as long as the intended r son movement or operation. In other words, the
fixture ond exactly the same.
DMX f hain. isy Chain connection is
where ects to the DATA IN of the next fixture. The order in which
the fixtures a w a controller co
each f nd most direct cabling. Connect fixtures
male to female connectors. The
d in 3 is Data positive (S+). CHAUVET
e 15’) and DMX-1.5 (5’)
e
To ma equently. Usage
and en g frequency. As a general rule, fixtures should
be cleaned at lea ance and can cause
overhe sed mechanic sure to p
fixture bef
Unplu ft b to re ove dust
collec ts. Clean all glass when the fix e is cold with a
mild s nd a soft lint free cotton cloth or lens tissue. Apply
solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish optical
rfac haze and lint.
The cl s must rrie to
optimize light output. Cleaning frequency depends on the environment in which the f ates:
mp, r accumulation of dirt on the unit’s
optics lways d e parts carefully. - Clean
the ex lea ery 30/60 days
Address: Service Dept.
3000 N 29th Ct, Hollywoo
Service)
hting.com
5. A
P DIX
DMX Primer
The are 512 channels in a DMX-512 connec r.
m ssign a starting address on the fixture that indicat nel re ed
of ch nnels required. Choosing a start
overlap. If they do, this will result in erratic operation o hose starti
orrectly. You can however, control multiple fixtures of the same
esult is that of uni
s will be slaved together and all resp
pe us he
ixtures are designed to receive data through a serial Daisy C
n
A Da
the DATA OUT of one fixture con
re connected is not important and has no effect on ho
r the easiest a
mmunicates to
ixture. Use an order that provides fo
using shielded two conductor t
shiel
carri
wisted pair cable with three pin XLR
connection is pin 1, while pin 2 is Data Negative (S-) and p
s 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (
General Maint nance
intain optimum performance and minimize wear fixtures should be cleaned fr
vironment are contributing factors in determinin
st twice a month. Dust build up reduces light output perform
ating. This can lead to reduced lamp life and increa
ore conducting maintenance.
al wear. Be ower off
g fixture from power. Use a vacuum or air compressor and a so rush m
ted on external vents and internal componen
s cleaner or Isopropyl Alcohol a
tur
olution of glas
su es until they are free of
eaning of internal and external optical lenses and/or mirror be ca d out periodically
ixture oper
da smoky or particularly dirty surrounding can cause greate
. Clean with soft cloth using normal glass cleaning fluid. - A
ternal optics at least every 20 days. Clean the internal optics at
ry th
st ev .
Q-Wash 575 User Manual 18
2007-08-03/09:10