Control Panel Functions
F
UNCTION
O
PTIONS
N
OTES
NO/YES
Pan Invert (Yes or No)
NO/YES
Tilt Invert (Yes or No)
001-497
DMX Channel Address
YES Fixture
reset
dn.Co.
Pr6.1
Pr6.2
SLAE
Sou.1
Sou.2
DMX-512 Mode
Automatic Program 1 (when mounted upside down)
Automatic Program 2 (when floor positioned)
Slave Mode
Music Program 1 (when mounted upside down)
Music Program 2 (when floor positioned)
ON
OFF
Lamp on
Lamp off
X.X Software
version
Status
Too hot to strike, or no lamp
Status Lamp
error
Program Options
M
ENU
O
PTION
D
ESCRIPTION
Automatic – Master Unit (Ceiling-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered automatically. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Sets the fixture to
Automatic – Master Unit (Floor-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered automatically. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Sets the fixture to
Slave Unit:
Sets the fixture to run in sync with the Master.
You must set the first fixture in the data link to “Master”
otherwise nothing will happen.
Sound Active – Master Unit (Ceiling-mounted):
to Master status for Master-Slave operation and the built in
programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Sets the fixture
Sound Active – Master Unit (Floor-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Sets the fixture to
DMX:
The fixture will be controlled by a DMX signal coming from
a DMX controller. The starting address must be selected.
Q-Wash 575 User Manual
13
2007-08-03/09:10
