LED-PAR200B User Manual
7
2006-07-06/10:32
O
PERATING
I
NSTRUCTIONS
The COLORsplash
™
200B is a DMX-512 controllable, full RGB color mix par can made up of highly
efficient and super bright leds. All red, green and blue LEDs can be controlled separately allowing the
creation of an unlimited range of colors.
The COLORsplash
™
200B can operate in Stand-Alone, Master/Slave and via DMX-512 control
utilizing 6 DMX channels.
Master/Slave Mode
The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In
this mode, the first unit in the daisy chain will automatically command all other units following.
1. Connect all COLORsplash
™
200B units in a daisy chain fashion as described in the section
following.
2. Dipswitch settings on slave fixtures are not required and will have no affect.
3. Set all dipswitches on the Master unit to the
“
Off
”
position and the unit wil
l run its built in color
change program.
OPTIONS
- Set Music/Auto switch to Music and for sound-activated triggering of the program
- Set Music/Auto switch to Auto then use the rotary dial to adjust speed of the program
- See below under Dipswitch Options for additional program settings
D a i s y C h a i n C o n n e c t i o n
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on.
D i p s w i t c h O p t i o n s
F
UNCTIONS
D
IPSWITCHES
(
ON
)
N
OTES
&
D
ESCRIPTION
Color change
program
None
Music/Auto switch
Music: Sound Activated, Rotary knob sets sound sensitivity
Auto: Rotary knob sets speed of program
1
Low Intensity
2
Medium Intensity
Red LEDs
3
Full Intensity
4
Low Intensity
5
Medium Intensity
Green LEDs
6
Full Intensity
7
Low Intensity
8
Medium Intensity
Blue LEDs
9
Full Intensity
“
User Color
”
Any combination of Red, Green and
Blue LED intensity to create custom
color.
For example Dipswitch 9 and 3 ON creates a Pink color
