Chauvet Green Thinking Professional Strike 324, Руководство пользователя

Страница: 10 / 21

Setup
-6- STRIKE™ 324 User Manual Rev. 3
3. Setup
AC Power
Each STRIKE™ 324 has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each
STRIKE™ 324, refer to the label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the Chauvet
website:
www.chauvetlighting.com/download/pro .
•
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug The STRIKE™ 324 comes with a NEUTRIK® powerCON A connector on one end and
an Edison plug on the other end (US market). If the power cord adapter that came with
your product has no plug or you need to change the Edison plug, use the table below to
wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
Fuse Replacement 1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.