Chauvet Green Thinking Professional Strike 324, Руководство пользователя

Страница: 13 / 21

Operation
STRIKE™ 324 User Manual Rev. 3 -9-
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP> Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN> Navigates downward through the menu list and decreases the
numeric value when in a function
Control Options
You can set the STRIKE™ 324 starting address in the 001–512 DMX range. This
enables control of up to 42 products in the 12-channel
12 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
•
To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the
Channel main level.
2. Select the desired personality ( 1 Ch , 5 Ch , 8 Ch , or 12 Ch ).
•
See the DMX Values section for the highest starting address you can select for each
personality.
•
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
DMX Personality .
2. Set the running mode:
a. Go to the M&S Mode main level.
b. Select Slave .
3. Set the starting address:
a. Go to the Address main level.
b. Select the starting address ( 001–512 ).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode DMX Address
1 Ch 512
5 Ch 508
8 Ch 505
12 Ch 501