Setup
STRIKE™ 324 User Manual Rev. 3
-7-
Power Linking
The STRIKE™ 324 supports power linking. You can power link up to 11 products at
120 V, 19 at 208 V, or 21 at 230 V. This product comes with a power input cord. A power
linking cable is available from Chauvet for purchase.
DMX Linking
You can link the STRIKE™ 324 to a DMX controller using a standard DMX serial
connection. If using other DMX compatible products with the STRIKE™ 324, you can
control each individually with a single DMX controller.
DMX Modes
The STRIKE™ 324 uses the standard DMX data connection for the 1-, 5-, 8-, and
12-channel DMX modes.
•
Refer to the
Introduction
chapter for a brief description of these modes.
•
Refer to the
Operation
chapter to learn how to configure the STRIKE™ 324 to work in
these modes.
•
The
DMX Values
section provides you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a STRIKE™ 324 (the “master”) to control one or more
STRIKE™ 324s (the “slaves”) without a DMX controller. One STRIKE™ 324 becomes
the master when running an Auto or Custom program, or by being in Static mode.
You must configure each slave’s control panel to operate in Slave mode. During
Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The
Operation
section of this manual provides detailed instructions on how to configure
the master and slaves.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet
website:
www.chauvetlighting.com/download/pro
.
Содержание Green Thinking Professional Strike 324
Страница 1: ...User Manual ...
Страница 4: ...Table of Contents ii STRIKE 324 User Manual Rev 3 NOTES ...
