Chauvet ART-150W, Руководство пользователя

Страница: 14 / 19

ART-150W & ART-252W User Manual 14
2005-01-31/12:52
Spectrum Color™ (Optional dedicated controller)
The ART-1CON is a user friendly dedicated controller for the Spectrum Architectural Exterior Wash. It
allows the user to select manually any one of 10 colors on buttons or any of the 15 available colors using
the slider including the color scroll effect. The controller can be set to hold any particular color or the timed-
chase can be modified between .01 seconds and 10 minutes. There are 10 built in chase patterns to
choose from. Unless you intend to hold a color for a full day, to extend the time period beyond 10 minutes
use a universal DMX controller. Visit www.chauvetlighting.com and browse the section under DMX
Controllers.
Chase Patterns Chase Pattern Description
1 Changes colors at random
2 Group changing colors – one by one
3 Group changing colors – two by two
4 Group changing colors – four by four
5 Group changing colors – eight by eight
6 Group changing colors – 16 by 16
7 Color chasing – one fixture after another in sequence
8 Color chasing – 2 after 2 in sequence
9 Color chasing – 4 after 4 in sequence
0 Color chasing – 8 after 8 in sequence
Auto Fixture Address
Hold down the BLACKOUT button and use the Color/Number buttons to enter the number of fixtures you
have daisy chained. Upon releasing, the fixtures will be automatically addressed.
Color & Number Buttons
These buttons are not only
used for the selection of a
color or chase patterns but
as a numerical keypad
when remote addressing
fixtures.
Blackout
Temporarily
eliminated light
output from the
fixture.
Chase
Pressing this buttons enables the pattern chase select using the Color/Numbers
buttons. The following 3 chase modes can also be set:
One way (LED On); color changes occur in one direction
Example: color 1,2,3,4,5 etc. color 1,2,3,4,5 etc.
Loop (LED blinks fast); color changes in forwards then reverse order
Example: color 1,2,3,4,5 ~ etc. ~ 5,4,3,2,1
Manual (LED blinks slowly); you can manually step through the scenes in a program
Example: press any one program button repeatedly to advance to the next step within the program
until the desired look is achieved.
Speed & Color Slider
When Chase button is activated, use
this slider to adjust the chase speed
from .01 to 10 minutes. When in
Hold
use to access all colors available on the
Spectrum, including a color scroll.
Hold
Enables the color
selection aspect
of the
Color/Numbers
buttons