10
11
Output
: Moisture heating.
Cover
: Cotton and polyester.
Display
: Numerical LCD (liquid crystal display).
Button
: Rubber made in double colors.
Sensor
: High resolution Digital thermal sensor.
Control
: Pulse trigger-control solid switched.
Circuit
: Digital Processor.
Protection
: Thermal switched.
Mode of Operation
: Continuous operation.
Heating
: Select 45-75°C (1°C/unit) or 113-166°F (2°F/unit) temperature output.
Timer
: 1-60 minute (1 minute/unit). Auto shut off.
Power Consumption
: AC 90-130V 40-70Hz
#1030 0.6A/70W
#1031 1.1A/145W
#1032 2.2A/290W
#1033 1.35A/175W
Pad Size
: #1030 / 15” x 7”
#1031 / 14” x 14”
#1032 / 27” x 14”
#1033 / 23” x 20”
Product Specifications
1. Check skin under pad frequently to avoid burning and blistering.
2. Unplug when not in use.
3. For normal treatment, do not use the pad over 30 minutes at high temperature 46-75°C / 114-166°F settings.
4. Display board should not be crushed or rammed.
5. Do not use while sleeping. Do not sit on or crush pad. Do not wet.
6. Do not use on an infant.
7. This pad is not to be used on or by an invalid, sleeping or unconscious person or a person with poor blood
circulation unless carefully attended, check skin under pad frequently.
8. Do not use on area of insensitive skin.
9. Never use pad without cover in place.
10. Carefully examine inner cover before each use, discard the pad if inner covering shows any signs of deterioration.
11. Do not use pins or other metallic means to fasten this pad in place.
12. Never pull this pad by the supply cord and do not use the cord as a handle.
13. Consult with your physician before you use this device.
CAUTION: Burn or Skin Injury
