4
Neo Vacuum Module Manual
•
Read, understand, and practice the precautionary and operating instructions.
Know the limitations and hazards associated with using any electrical
stimulation. Observe the precautionary and operational decals placed on the
unit.
•
DO NOT operate this unit in an environment where other devices are being used
that intentionally radiate electromagnetic energy in an unshielded manner.
•
All modalities should be routinely checked before each use to determine that all
controls function normally, especially that the intensity control does properly
adjust the intensity of the ultrasonic power output in a stable manner. Also,
determine that the treatment time control does actually terminate ultrasonic
power output when the timer reaches zero.
•
Device is designed to comply with electromagnetic safety standards. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
interference to other devices in the vicinity. However, there is no guarantee that
interference will not occur in a particular installation. Harmful interference to
other devices can be determined by turning this equipment on and off. Try to
correct the interference using one or more of the following:
- Reorient or relocate the receiving device
- Increase the separation between the equipment
- Connect the equipment to an outlet on a different circuit from that
the other device(s) are connected and consult the factory field service
technician for help.
- Consult your authorized DJO dealer for help.
•
Do not operate this unit when connected to any unit other than DJO devices or
accessories specifically described in user or service manuals.
•
DO NOT disassemble, modify, or remodel the unit or accessories. This may cause
unit damage, malfunction, electrical shock, fire, or personal injury.
•
Failure to use and maintain the Intelect® Neo System, its modules, and its
accessories in accordance with the instructions outlined in this manual will
invalidate the warranty.
CAUTION
WARNING
6. Reattach the Back Panel on the Neo Head Unit. Secure
the back panel to the chassis with the two (2) screws
that were removed in Step 3.
7. Reattach the handle and secure with the four (4)
screws that were removed in Step 3.
8. Return faceplates to both sides of the Neo Head. Refer
to Intelect Neo Clinical Therapy System User Manual,
item #13-7651, for instructions on installing faceplates.
9. Replace the Drawer.
10. Reconnect the power cord to the rear of the device.
MODULE INSTALLATION (CONTINUED)
•
DO NOT permit foreign materials, liquids or cleaning agents to enter the unit,
including, but not limited to, inflammables, water, and metallic objects from
entering the unit, to prevent unit damage, malfunction, electrical shock, fire, or
personal injury.
•
Use of parts or materials other than DJO’s can degrade minimum safety.
•
The Intelect® Neo Clinical Therapy System is not designed to prevent the ingress
of water or liquids. Ingress of water or liquids could cause malfunction of internal
components of the system and therefore create a risk of injury to the patient.
•
The Intelect® Neo Vacuum Electrode Module is designed to operate only when
properly installed in the Intelect® Neo Clinical Therapy System Cart.
•
Before each use, inspect Vacuum Electrode Cups and Lead Hoses for cracks and
damage which may not allow the vacuum to properly secure the electrodes.
•
Drain the Vacuum Electrode Module water reservoir regularly to prevent
excessive accumulation from electrode sponge water.
•
Periodic flushing of the system and reservoir are required to maintain Factory
functionality of the Vacuum Electrode Module. Refer to the Maintenance Section
of this manual for proper instructions.
•
Be sure to read all instructions for operation before treating patient.
•
Make certain the unit is electrically grounded by connecting only to a grounded
electrical service receptacle conforming to the applicable national and local
electrical codes.
•
Care must be taken when operating this equipment around other equipment.
Potential electromagnetic or other interference could occur to this or to the
other equipment. Try to minimize this interference by not using other
equipment in conjunction with it.
•
This device should be kept out of the reach of children.
•
Use of accessories other than those specified in this User Manual may increase
electrical emissions and decrease electrical immunity of the device.
•
DO NOT operate this unit in an environment where other devices are being used
that intentionally radiate electromagnetic energy in an unshielded manner.
•
Contaminated sponges, electrodes, and leadhoses can lead to infection.
•
Use of contaminated sponge or electrodes with corrosion with vacuum system
can result in possible infection or skin irritation.
•
Clean vacuum sponges, electrodes, and leadhoses before each use otherwise it
can lead to cross-contamination and infection.
•
Stop treatment immediately if patient experiences discomfort or pain.
