23
Fluidotherapy®- Dry Heat Therapy
REQUIRED MAINTENANCE
WEEKLY MAINTENANCE
Each week all sleeves of the Fluidotherapy unit should be laundered in a
mild antibacterial detergent. Allow the sleeves to air dry or dry on a low
temperature setting. Drying the sleeves in high temperatures could cause
the sleeves to shrink or become distorted resulting in the sleeve(s) not
properly fitting when placing them back onto the unit.
REMOVING TOP SLEEVES (All Models)
Unplug the unit from the power source.
Carefully remove the rectangular bezel(s)
from the top of the unit.
Carefully pull the hook and loop fasteners
apart to remove the sleeve from the unit.
Replace in reverse order making certain
the corners are well seated to form the seal
required to prevent excessive escape of
medium.
REMOVING END SLEEVE
(Model FLU110D & FLU110DE)
Carefully pull the hook and loop fastener on
the sleeve to remove sleeve from unit.
Replace in reverse order making certain
the corners are well seated to form the seal
required to prevent excessive escape of
medium.
REMOVING END SLEEVE
(Model FLU210D & FLU210DE)
With Top Sleeve removed, reach in through
the top port and carefully pull the hook
and loop fastener of the sleeve away from
the unit.
Replace in reverse order making certain
the corners are well seated to form the
seal required to prevent excessive escape
of medium.
