manualshive.com logo in svg

Chattanooga Group TX 4759, Руководство пользователя

Поделиться
Скачать
Chattanooga Group TX 4759 Скачать руководство пользователя страница 3

TX® Traction 

1

This manual has been written for the operators of the TX traction unit. It contains general instructions for operation, precautionary 
instructions, and maintenance recommendations. In order to obtain maximum life and efficiency from your TX traction unit, and to assist 
in the proper operation of the unit, read and understand this manual thoroughly.

The specifications put forth in this manual were in effect at the time of publication. However, owing to Chattanooga Group's policy of 
continuous improvement, changes to these specifications may be made at any time without obligation on the part of Chattanooga Group.

Before administering any treatment to a patient, you should become acquainted with the operating procedures, as well as the indications, 
contraindications, cautions, warnings, and dangers. Consult other resources for additional information regarding the application of traction 
therapy. 

Product Description

The TX traction unit is a simple to use digital touch screen user interface traction unit that offers static, intermittent, and cyclic traction with 
user definable hold, rest, and treatment times. Patient Pain Profiles are recorded before and after treatment with a Numeric Pain Scale, VAS 
(Visual Analog Scale), and Pain Map for each patient. Once treatment parameters are customized for a patient, clinicians can store them as 
either the default user protocol or as one of ten user defined protocols. The TX traction unit contains a Patient Data Card port, that allows 
the unit to store the above session parameters on Patient Data Cards.

This equipment is to be used only under the prescription and supervision of a licensed practitioner.

©2005 Encore Medical Corporation or its affiliates, Austin, Texas, USA. Any use of editorial, pictorial, or layout composition of this publication without express written consent 
from the Chattanooga Group of Encore Medical, L.P. is strictly prohibited. This publication was written, illustrated, and prepared for print by the Chattanooga Group of Encore 
Medical, L.P.

FOREWORD

Содержание TX 4759












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды