TX® Traction
24
OPERATION
OPERATING CONTROLS HOME SCREEN CONTINUED
If the Maximum Level of traction tension is greater than 39 lbs (17 kg
or 166 N), a message will be displayed saying "
Cervical traction should
not be performed with a tension greater than 39 lbs (17 kg or 166 N);
indicate the type of traction to be performed"
. The Lumbar button must
be pressed to start treatment, otherwise press the Cervical button and
re-enter the Maximum Level of traction tension to be equal to or lower
than 39 lbs (17 kg or 166 N).
NOTE:
The Maximum Traction Tension can be changed during the
traction therapy session by pressing the Max Level button, then
use the Up or Down Arrow buttons to make changes in 1 lb
(1 kg or 1 N) increments. Press the Return Arrow button to accept.
(13) Clinical Resources
This button offers the following features of the traction unit:
Patient Data Card and User Protocols in the Operation Section for
more information)
•
Patient Card
•
Patient Card (Patient Name)
•
Edit Treatment Being Setup
•
Erase Patient Card
•
Protocols
•
Retrieve Protocol
•
Save Protocol
•
Utilities
•
(see Pages 17-18 for more information)
(10) Hold Time
Displays the amount of hold time (0-99 seconds) entered during setup.
To enter the hold time, press the Hold Time button, then enter the
desired Hold Time using the number keypad. Press the Return Arrow
button to accept.
NOTE:
The Hold Time can be changed during the traction therapy
session by pressing the Hold Time button, then use the Up or
Down Arrow buttons to make any changes. Press the Return
Arrow button to accept.
(11) Minimum Level
Displays the minimum traction tension entered during setup. To enter
the minimum traction tension, press the Min Level button, then enter
the desired minimum setting using the number keypad. Press the Return
Arrow button to accept.
NOTE:
The Minimum Traction Tension can be changed during the
traction therapy session by pressing the Min Level button, then
use the Up or Down Arrow buttons to make changes in 1 lb
(1 kg or 1 N) increments. Press the Return Arrow button to accept.
(12) Maximum Level
Displays the maximum traction tension entered during setup. To enter
the maximum traction tension, press the Max Level button, then enter
the desired maximum setting using the number keypad. Press the
Return Arrow button to accept.
