5
6
Adaptor Receptacle
You also can use adaptor instead of battery. Insert adaptor plug into the adaptor receptacle to be used. Whenever
you use adaptor, the battery power supply will be cut off automatically.
Battery compartment
9 Voltage battery- 1 pc
Slide Cover:
A panel covers the controls. Your medical professional may ask to set these controls for you and request you leave
the cover in place.
Amplitude Control:
It controls the "INTENSITY" level of stimulating pulses. The control located at the right top of the unit regulates the
amplitude, or intensity, of the stimulation and is the ON/OFF CONTROL. The power indicator will light up with
green color when the unit is working.
Caution: If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation intensity to a comfortable level
and contact your physician if problems persist.
Rate Control
Adjust Frequency from 1 Hz to 150 Hz by turning the control. The control is located at the left top of the unit.
Electrode Switch
To select for using two electrode pads or four electrode pads.
Mode Selector
Set C, 1/1, 8/8, 10/10 mode
The specification of adaptor
Input: 120 Volts AC, 60Hz, 7W
Output: 9 Volts AC, 300mA
