4.7 Adjust the Rate:
The rate is adjustable 1~150Hz.
Turn Rate Control to adjust Rate to the setting recommended by your medical
professional.
4.8 Adjust Channel Amplitude:
Turn Amplitude knob clockwise. Slowly turn the Amplitude control until you reach the
setting recommended by your prescribing medical practitioner.
Caution: If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation
intensity to a comfortable level and contact your physician if problems persist.
4.9 Turn Unit Off:
Turn Channel Amplitude control to
OFF
. Unplug the electrode lead wires, grasping them
by the plug, not the cord. If treatment will be resumed shortly, the electrodes may be left on the skin. When the
electrodes are removed, clean the skin thoroughly with mild soap and water. If there is skin irritation, consult your
medical professional.
4.4 Place electrodes on skin:
Apply electrodes to the exact site indicated by your physician following the instruction
included with the electrodes labeling. Before applying electrodes, be sure the skin surface
over which electrodes are placed is thoroughly cleaned and dried. Make sure the
electrodes are placed firmly to skin and make good contact between the skin and the
electrodes. Place the electrodes over the skin; attach them properly, firmly and evenly.
ADJUSTING THE CONTROLS
4.5 Select the electrode numbers
Shift to the left when applying one pair of electrodes (the "two electrodes" position). Shift
the switch to the right when applying two pairs of electrodes (the "four electrodes"
position). No stimulation is delivered from "Channel 1" when one pair of
electrodes is utilized and the electrode switch is set in the "two electrodes"
position.
4.6 Select the mode:
Shift "MODE" switch to set the stimulation mode recommended by your physician or
therapist. For details about stimulating sequences, refer to Sec. 3 "Stimulation Modes ".
12
11
