9
4.3 Connect lead wires to unit:
Before proceeding to this step, be sure the unit is completely turned OFF. Holding the insulated portion of the lead
wire connector, insert the angled-"L" plug into the receptacle on the right side of the main unit. Ensure the lead
wires are inserted correctly. The unit has two output receptacles. You may choose to use one channel with one pair
of lead wires or both channels with two pairs of lead wires.
NOTE: Always read this instruction manual before use.
PREPARATION FOR USE
4.1 Check Battery:
Insert a fresh 9V alkaline or rechargeable battery into the battery compartment. Make
sure that you are installing the battery properly. The battery is inserted in the casing on
the foot of the stimulator unit.
BE SURE TO MATCH THE POSITIVE AND NEGATIVE ENDS OF THE
BATTERY TO THE MARKINGS IN THE BATTERY COMPARTMENT OF
UNIT.
CONNECTING THE STIMULATOR
4.2 Connect electrodes to lead wires:
Insert the lead wire connector into electrodes connector (standard 0.08 inch female
connection).
MAKE SURE THAT NO BARE METAL OF THE PINS IS EXPOSED
Caution: Always use the electrodes with the requirements of the EN60601-1 and EN60601-2, such as with
CE mark, or which are legally marketed in the US under 510(K) procedure.
4. INSTRUCTIONS FOR USE
Self-adhesive
Electrodes Pads
Angle"L"-shape
plug
10
