TERAFRAME
®
FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK
Page 4 of 6
Installation Instructions
ELS1500 Lock Assembly Sequence:
1. Install the two point ELS1500 (Fig. 6) onto TeraFrame front door.
2. Install lock rod guide brackets in the top and bottom door. Do not insert
the lock rods yet (Fig. 7).
3. Position the Rear plate inside the door over the latch cut-out and fasten
with two M4X10mm screws and M4 Tooth washer under each screw
head. (Fig. 7).
Door back side
Lock rod Guide
Bracket
M4 Tooth
washer
M4 X 10mm
Taptite screw
Fig. 7
ELS1500 lock
Door with rear plate installation
Rear plate
ELS1500
Front plate 2
ELS1500
Fig. 6
ELS1500 Lock
Front plate Border
ELS1500
ELS1500
lock
Rear plate
ELS1500
M4 X 10mm
taptite screw
Lock rod
Clevis pin
M6 X 35mm
Hex screw
M5 X 16mm
screw
M4 Tooth washer
E-ring
M10 washer
