TERAFRAME
®
FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK
Page 3 of 6
Installation Instructions
6. Place the M16 Nut over the lock spindle, push the cam onto the cam
spindle (Fig.4).
7. Fasten the cam into the Lock spindle with M4X10mm flanged screws
and M10 washer in ELS1000 locks (Fig. 4).
8. Insert the lock rods through the guides, with the short rod on the top
and the long rod on the bottom (Fig. 5).
9. Insert the cam assembly pins through the short rod (on top) and the
long rod (on bottom), then through the other half of the cam
assembly (Fig. 5) and locked with-ring.
Lock rod
Lock rod
Guide
Clevis Pin
E-ring
Fig. 5
ELS1000
M16 Nut
M4 X 10mm
flanged screw
M10 Washer
Rear plate
Fig. 4
ELS1000 Lock
Back side view
Cam
