TERAFRAME
®
FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK
Page 2 of 6
Installation Instructions
2. Install lock rod guide brackets in the top and bottom door. Do not insert
the lock rods yet (Fig. 2).
3. Position the Rear plate inside the door over the latch cut-out and fasten
with two M4X10mm screws and M4 Tooth washer under each screw
head. The Tooth washer provides an electrical bonding point (Fig. 2).
4. Place the ELS1000 lock with the Front plate border in front door with
spindle orientation up (Fig. 3).
5. Secure the ELS1000 lock to the rear plate with the M4 X 12mm screws
and M4 washer in the top and bottom holes (Fig. 3).
Door back side
Lock rod Guide
Bracket
M4 Tooth
washer
M4 X 10mm
Taptite screw
Fig. 2
ELS1000 lock
Door with rear plate installation
Rear plate
ELS1000
Fig. 3
ELS1000 Lock Installation
ELS1000 Lock
Front plate border
ELS1000 lock
Front plate
ELS1000
M16 Nut
M4 X 12mm
Screw
M4 washer
