THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO
CHATSWORTH PRODUCTS, INC. ANY REPRODUCTION DISCLOSURE
OR USE OF THIS DRAWING IS EXPRESSLY FORBIDDEN EXCEPT
AS AGREED TO IN WRITING BY CHATSWORTH PRODUCTS, INC.
INSTALLATION
INSTRUCTIONS,
CUBE-IT+ CABINET
IIS-711890, SHEET 3 OF 4 - ASSEMBLY INSTRUCTIONS, CUBE IT CABINET - 1:4 - 1-28-03 - ISS. 6 - CPI/BK
3
MOUNTING CABINET TO REAR PANEL
STEP 1. HOOK THE TOP HINGE PLATE ONTO THE TOP HINGE PIN.
STEP 2. ALIGN THE BOTTOM HINGE PLATE HOLE WITH THE BOTTOM
HINGE PIN. SLIDE THE HINGE PIN DOWN INTO THE HINGE HOLE
AS FAR AS POSSIBLE.
STEP 3. REINSTALL THE CENTER BOLT AND NUT. TIGHTEN ALL THREE
BOTTOM NUTS SECURELY.
THE CENTER BOLT MUST BE REPLACED TO
INSURE THAT THE HINGE PIN DOES NOT
SLIP DURING OPERATION
24.00
36.25,
OR 48.50
24.00,
24.00,
OR 36.00
18.00,
