No
t f
or
om
m
er
ci
al
U
se
Getting started
7
Alternative A: Automatic setup
1. The Chatpen automatically starts configuration to your service
provider when you have paired it.
2. To check that the Chatpen works, send an e-mail or text message
to yourself. See “Sending messages” on page 11.
Alternative B: Web setup
1. Go to the web address defined by your service provider, and
follow the setup instructions.
2. To check that the Chatpen works, send an e-mail or text message
to yourself. See “Sending messages” on page 11.
Alternative C: Paper setup
1. Follow the instructions on the setup paper from your service
provider.
2. To check that the Chatpen works, send an e-mail or text message
to yourself. See “Sending messages” on page 11.
Alternative D: Manual setup
For manual setup, you need to know the phone number of your
service provider, your own username and password, primary and
secondary DNS, APN, proxy, service provider ID and your own
e-mail address. The settings you enter for Standardized services are
the settings that will be used for all services described in this manual.
The settings you enter for Open services are the settings that will be
used for other services.
1. With your Chatpen, tick the
Set service provider
box on page 18.
2. Follow the instructions that appear, and enter the data.
3. When your e-mail address appears in the phone display, make
sure it is correct. If not, edit it on the phone. See “Editing ticks and
characters” on page 14.
4. To check that the Chatpen works, send an e-mail or text message
to yourself. See “Sending messages” on page 11.
4. Activating the notepad
In your notepad, tick
to activate the notepad before you start
to write.
