DX-2
www.chasswheel.com
rev. 1
2014-05-08
30
The width of the arm rest is adjusted by loosening the
screw 1 and moving the arm rest sideways. When the
suitable position has been found, retighten the screw. The
maximum width is 60mm (picture below). The arm rest
angle is adjusted by loosening the screws 2. When the
suitable position has been found, retighten the screws.
The arm rest height and angle are adjusted with a 5mm hexagonal key. Adjusting the height is
performed by loosening the screw (A) and moving the arm rest up and down. When the height is
suitable, retighten the screw.
For the adjustment of the arm rest angle, the support is raised to an upright position. The angle is
adjusted by turning the screw (B), until the suitable position is found.
