DX-2
www.chasswheel.com
rev. 1
2014-05-08
24
• If you press the drive lever forwards when two crosses
are displayed above the function key (B), the changes
you have made to the time display will not be saved.
• To carry out further settings, press the "Activate setting
mode" key (A) or move the drive lever right or left
again.
• To return to drive mode, press the "Activate drive
mode/switch-through" key (C).
2.9.5 Changing the screen backround
• The symbol for screen background (see Chapter 2.9.1) is
shown in the display.
• Press the function key (B) or move the drive lever right or left
to select one of the three modes.
• Select (1) if you want to have a black screen background.
• Select (2) if you want to have a white screen background.
• Select (3) if you want the screen background to be set to
standard.
• Press the "Activate setting mode" key (A) or move the drive
lever forwards to save the change.
• To carry out further settings, press the "Activate setting
mode" key (A) or move the drive lever right or left again.
