DX-2
www.chasswheel.com
rev. 1
2014-05-08
10
The reliability of the wheelchair and the control system is improved, if you keep exposure to
extreme conditions to a minimum.
Damaged wheelchair cables create a safety risk.
Check the condition of the tyres regularly. It is important for the steering properties and grip abilities
to have a correct tyre pressure. Measuring the tyre pressure is explained in section “Wheelchair
servicing”.
Use the locking key to prevent illicit use of the wheelchair. Someone other than the owner using the
wheelchair is a safety risk.
Always attach the wheelchair to the car’s body part during transport. Sitting in the wheelchair during
transportation is absolutely forbidden.
Unauthorized repairs and modifications are forbidden. The user may perform the servicing
operations referred to in section “wheelchair servicing”. When the wheelchair is being serviced or
adjusted, the driving controller must be switched off.
Using the other than gel batteries is forbidden due to the danger of damaging the wheelchair’s
electric parts.
Handling tools in close proximity to the batteries may cause short circuit. Handling an open flame is
forbidden because of the danger of explosion. The battery casing is not intended to be used as a
storage container. The cables in the battery naves should not disconnect on one’s own. In the
problem situation, please contact the service.
1.4 The permanent labeling of the wheelchair
Identification plates, situated on the left side of the frame
