Charnwood W715, Руководство по эксплуатации

Страница: 11 / 16

11
Lower the upper blade guide
Remove the rip fence carrier
(shown here still in place)
Slide blade off upper and lower
wheels, bringing it out of the
machine via the slots in the rear
frame and the blade guard.
Reverse these steps to fit the new blade. Ensure that the teeth are at the front and pointing
down.
Position the blade between the guide pins. Tension and adjust the tracking as done during
the initial set up. Check and adjust, if necessary, the position of the two thrust bearings and
the guide pins.