3
17.
Never leave the machine running unattended. Turn the power off. Do not leave the
machine until it comes to a complete stop.
18.
Do not use any power tools while under the effects of drugs, alcohol or medication.
19.
Always wear a face or dust mask if operation creates a lot of dust and/or chips. Always
operate the tool in a well ventilated area and provide for proper dust removal. Use a
suitable dust extractor.
ADDITIONAL RULES FOR BAND SAWS
1.
Ensure that the saw table is clear of off-cuts, tools or anything else that might foul the work-
piece.
2.
When cutting long boards use one or more roller stand(s) to support the work or have a
competent helper to support it as it feeds off the rear of the table.
3.
Always make sure that the blade is tracked and tensioned correctly before starting to use
the saw.
4.
Always use a brush to clear the table of dust or debris.
NEVER
use your hands, especially
when the machine is running.
5.
Always ensure that the thrust bearings and guide blocks are correctly adjusted before using
the saw.
6.
ALWAYS USE A PUSH STICK WHEN IT IS NECESSARY TO PUSH ANY PIECE OF MATERIAL OF
SUCH SIZE THAT IT WOULD BRING YOUR HANDS WITHIN 30 CM OF THE BLADE.
7.
Do not cut material that is badly warped or which has screws or nails in it.
8.
Be extra vigilant when cutting stock which has loose knots in it as these my fly out of the
saw.
9.
NEVER tilt the table when the saw is running.
10.
To avoid exposure to hazardous dust, do not use this saw without connecting it to a suitable
dust extractor.
11.
Always work with a sharp saw blade and feed the work at a rate suited to the thickness and
hardness of the material.
Note: This band saw has been designed and built solely as a woodworking machine. Do not modify it
in any way or use it for anything other than its designated purpose. Neither the manufactures nor
the supplier are liable for any damage or injury caused by incorrect assembly, operation or electrical
connection of this machine.
Содержание W715
Страница 15: ...15 ...