Charnwood W715, Руководство по эксплуатации

Страница: 9 / 16

9
The upper and lower thrust bearings and
guide pins should be set up next.
Thrust bearing
Guide pin
Guide pin locking screw
Thrust bearing locking screw
The thrust bearing should be about 0.5 mm
behind the back of the blade. Adjust it and
lock it place.
Slacken the guide pin locking screws, push
the pins in until they touch the blade. Rotate
the top wheel by hand a few turns and lock
the pins in the position they have assumed.
The lower thrust bearing and guide pins are
adjusted similarly.
Guide pin locking screw
Guide pin
Lower thrust bearing
Blade guard
The scale is adjustable and can be slid
within its housing by slackening this
screw.