Charnwood W040, Руководство по эксплуатации

Страница: 3 / 24

3
5. Keep your work area clean. Cluttered areas and workbenches increase the chance
of an accident.'
6. Do not use in dangerous environments. Do not use power tools in damp or wet
locations, or expose them to rain. Keep work areas well illuminated.
7. Keep children away. All visitors should be kept a safe distance from the work
area.
8. Make workshop childproof. Use padlocks, master switches and remove starter
keys.
9. Do not force the machine. It will do the job better and be safer, at the rate for
which it is designed.
10. Use the right tools. Do not force the machine or attachments to do a job for which they
are not designed. Contact the manufacturer or distributor if there is any question about
the machine's suitability for a particular job.
11. Wear proper apparel. Avoid loose clothing, gloves, ties, rings, bracelets, and jewellery
which could get caught in moving parts. Non-slip footwear is recommended. Wear
protective hair covering to contain long hair.
12. Always use safety glasses. Normal spectacles only have impact resistant lenses. They are
not safety glasses.
13. Do not over-reach. Keep proper footing and balance at all times.
14. Maintain machine in good condition. Keep machine clean for best and safest
performance. Follow instructions for lubrication and changing accessories.
15. Disconnect the machine from its power source before servicing and when changing
accessories.
16. To avoid accidental starting, make sure the switch is in the OFF position before plugging in
the mains cable.
17. Never leave the machine running unattended. Turn the power off. Do not leave the
machine until it comes to a complete stop.
18. Do not use any power tools while under the effects of drugs, alcohol or medication.
19. Always wear a face or dust mask if operation creates a lot of dust and/or chips. Always
operate the tool in a well ventilated area and provide for proper dust removal. Use a
suitable dust extractor.
EXTRA RULES FOR SPINDLE MOULDERS
1. A spindle moulder should never be used by an untrained operator. Proper training is
essential for the operator’s safety.
2. The machine must be properly maintained and the correct fitting of all guards checked.