Charnwood W040, Руководство по эксплуатации

Страница: 10 / 24

10
Locate the spindle lock bar on the
right hand side of the machine.
Rotate the tapered spindle slowly
whilst pressing the locking bar
inwards. When the lock engages the
bar will slide in around 10mm and
the spindle will be locked.
Pull the bar out to unlock the
spindle.
With the tapered spindle locked, fit
the upper spindle.
Use a flat screwdriver to unscrew
the locking ring in the centre of the
upper spindle.
Place the upper spindle over the
taper and tighten the retaining screw
by passing a 6mm Allen key into the
centre of the spindle.
Next use the flat screwdriver to
tighten the locking ring down onto
the head of the retaining screw.
Warning: Failure to tighten the
locking ring may result in the arbor
and cutter block coming loose.
If the bolt holding the upper and
tapered spindle together ever
comes loose, it will be necessary to
use the special spanner provided to
hold the upper spindle in place
whilst unlocking the top bolt.