Charnwood W040, Руководство по эксплуатации

Страница: 15 / 24

15
Before fitting the cutter block onto
the spindle, engage the spindle lock.
Now fit, (in reverse order):
The locking bolt
The top cap
the spacer with the roll pin
some spacers
the cutter block
some more spacers
The locking bolt must be firmly
tightened.
Once the stack on the spindle is
tight, release the spindle rotation
lock, before starting the machine.
The Spindle Controls
Spindle Height Locking Lever
Rise and fall hand wheel.
One complete turn raises or lowers
the arbor by 2 mm
(0.08”).
Spindle Rotation Lock
Changing Speed
The spindle moulder has 4 speeds.
To change speed;
Unscrew the knob and open this
access door.
(The machine is fitted with a micro
switch and will not run when this
door is open)