Routine Maintenance
Replacing the Drive Belt
Eventually, the drive belt will become
worn and require replacement.
To replace the belt, remove the motor
pulley cover and top pulley access
cover.
Remove the chrome hand wheel from
the spindle by unscrewing it from the
spindle. Hold the spindle with the
spanner and unscrew the handwheel
anticlockwise using the knock-out bar
as a lever. Remove the cover plate
surrounding the spindle to allow access
for the belt
Release the tension as when changing
the speed range and remove the old
belt by feeding it over the end of the
spindle and through the aperture in the
headstock casting.
Содержание 1420V
Страница 16: ...Charnwood 1420V Wiring Diagram ...
Страница 19: ...Charnwood 1420V Parts Drawing ...