CHARLY DIAMONDcross 100 Basic, Руководство по эксплуатации

Страница: 9 / 36

In addition, CHARLY inner containers are equipped with fabric-protected rubbers diameter
3 mm, which can be easily replaced as they age. Closure rubbers without protection have
often led to accidental deployments in the past.
The CHARLY standard flat container has been developed on the G-Force trainer
and is the result of years of experience with reserve deployments under centrifugal
force.
The deployment tests have shown that pulling out the first third of the container requires
the most energy, as the inner container often gets caught in the container compartment
during this first phase of the deployment. The very flat and in the front area conical shape
with a small cross-section of the CHARLY standard flat container counters this danger in
the best possible way.
The tests prove that the flat container can be pulled out of the reserve compartment in the
harness much better and with less effort than a cube-shaped container - even if the latter
has a significantly smaller volume.
Thanks to its centered, triangular pull tab, the CHARLY flat container will slide out of the
harness even if the deployment handle is intuitively pulled upward instead of outward.
The alternative CHARLY front inner container has the conventional round shape, which
is ideal for front outer containers.
A detailed description for repacking from the standard flat container to the front inner
container is available on CHARLY’s website.
S = red
For DC100
M = blue
For DC125
L = black
For DC160
S = red
For DC100
M = blue
For DC125
L = black
For DC160
XL = orange
For DC220
Operating & packing instructions | DIAMONDcross 09