CHARLY DIAMONDcross 100 Basic, Руководство по эксплуатации

Страница: 13 / 36

Please contact the harness manufacturer if the release handle connection is too long. If it
is necessary to shorten the connection between the handle and the inner container, this
must be done by the handle manufacturer or another qualified specialist. It is required to
use a high-strength sewing thread (Art.No. HNae40) for this purpose.
Release handles and third-party inner containers
In modern harnesses with integrated container compartment, the release handle and
inner container usually are a single unit, which has been specially tested during the
approval of the harness or front container. The CHARLY pocket container can no longer
be used for these harnesses. Rather, it is necessary that the reserve is repacked into the
harness manufacturer’s inner container. CHARLY permits this, provided that it is a standard
cloverleaf inner container and its volume is not less than that of the CHARLY rescue system
(see technical data). If the design of the third-party inner container differs significantly
from the usual cloverleaf containers, the handle-inner container combination must be
sent to CHARLY for approval.
The following steps describe the repacking of a DIAMONDcross ST from the CHARLY
standard flat container into the GIN Genie Lite 3 cloverleaf inner container (CHARLY Art.
No. HFa1952).
It is not a problem that third-party containers usually have only one closure for the two line
bundles. The bundles can simply be put together in the closure rubber.
Unpacking from the CHARLY standard flat container
Please note: The following steps for repacking the reserve into a third-party
cloverleaf inner container are to be understood as an example only. Detailed
instructions must be obtained from the respective manufacturer of the third-
party container.
Repacking into third-party inner containers
Reserve packed inside the CHARLY
standard flat container
Tie both line bundles together with
packing cords
Operating & packing instructions | DIAMONDcross 13