Charlton & Jenrick Polaris 1000, Инструкция по установке и эксплуатации

Страница: 22 / 34

19
Flame Effect
6b.4 Press to enter the flame effect adjustment screen.
6b.5 Press the ‘←’ and ‘→’ bu on to select the 3 kinds of flame
effect.
6b.6 Press the ‘+’ and ‘-’ bu on to select the 5 brightness of
flame effect and OFF se ngs.
Fuel Bed Color
6b.7 Press to enter the fuel bed adjustment screen.
6b.8 Press the ‘←’ and ‘→’ bu on to cycle through the 13
colors of fuel bed or a color-cycle mode.
6b.9 Press the ‘+’ and ‘-’ bu on to select the 5 brightness of
fuel bed and OFF se ngs.
Mood Light
Note: If mood lights are not connected, please ensure the brightness is set to zero.
6b.10 Press to enter the mood light adjustment screen.
6b.11 Press the ‘←’ and ‘→’ bu on to cycle through the 13
colors of mood light or a color-cycle mode.
6b.12 Press the ‘+’ and ‘-’ bu on to select the 5 brightness of
mood light and OFF se ngs.
Normal Mode
6b.13 Normal control mode is factory set. If it is not, then press
bu on un l the logo shows up at the upper right cor-
ner of the screen.
6b.14 Press the ‘+’ and ‘-’ bu on to adjust the temperature
from 17
℃
to 25
℃
by 2 intervals.
6b.15 Press bu on to turn on/off heat, ON
、
OFF
will show at the lower of the screen.