Charlton & Jenrick Polaris 1000, Инструкция по установке и эксплуатации

Страница: 23 / 34

20
NOTE: It is normal for the fan heater to stop running for periods of me. This happens
because the room temperature is at or above the temperature set on the remote con-
trol. The heater indicator will be turned off a er 10s if you have the flame ON. The
heater indicator will stay ON if you use the hea ng func on only.
Count Down Timer
NOTE: This se ng is only for normal mode. It allows the appliance to go into standby
a er a set period of me.
6b.16 Press to cycle through the se ngs from Off and 0.5
hours to 9 hours. The mer logo and me will show on the
screen.
The heater must be in ON posi on.
The heater can be automa cally run by using daily mer and
weekly mer on the remote.
Set up Day, Time and Comfortable temperature.
6b.17 Press to turn on the remote handset. Hold the
bu on for 3 seconds to enter the se ng screen.
6b.18 Press the ‘←’ and ‘→’ bu on to choose Day, Time or
your comfortable temperature. The character selected will be
highlighted.
6b.19 Pressing the ‘+’ and ‘-’ bu on will adjust the number.
●
Time: 24-hour system
●
Select your comfortable temperature from 15-25
℃
.
●
Temperature unit:
℃、℉
Daily Timer Hea ng
6b.20 The following are preset hea ng periods, which can be
altered if desired
06:00 un l 08:30
17:00 un l 22:00
6b.21 Press un l shows at the upper right corner of the screen, then enter the