Charlton & Jenrick PANACHE 8040, Инструкция для пользователя, установка и обслуживание

Страница: 30 / 54

P a g e | 29
Issue No - 4(11/08/21)
PANACHE 8040 INSTALLATION INSTRUCTIONS
Four sided trim.
Position the four magnets provided with the decorative trim on each of the four corners of the fire
box flange.
Using the slip frame as an internal guide locate the trim over the frame and fix into position using
the four magnets.
Commissioning the Appliance
Checking gas soundness and running pressure.
Turn on the supply to the appliance and check for soundness in accordance with the current
codes of practice.
Turn off the gas supply at the external isolation valve.
Remove the pressure test point screw from the inlet elbow and connect the pressure gauge.
Turn on the gas to the appliance at the isolation valve.
Light the appliance as described in the user instruction section. Page 5 turn on (startup).
Check the inlet pressure is 20 mbar +/- 1.0 mbar for natural gas with other appliances running.
Turn off gas supply, at the isolation valve. Disconnect the pressure gauge and replace the
pressure test point screw.
Turn on the appliance and check the pressure test point for soundness with detection fluid.