Charlton & Jenrick PANACHE 8040, Инструкция для пользователя, установка и обслуживание

Страница: 11 / 54

P a g e | 10
Issue No - 4(11/08/21)
PANACHE 8040 USERS INSTRUCTIONS
Using a damp cloth and warm soapy water will remove a majority of stains. For more substantial
marking we recommend the use of ceramic hob cleaner. These are available from all leading
super markets. The brands
of hob cleaner we have tested and found suitable are “Hob brite” &
“ Bar Keepers Friend ”. Ensure the glass is dry and re -assemble.
Note- Never operate the appliance when the glass panel is removed or broken. The glass may discolour quickly
when first installed, and it should be cleaned. This is due to the burning of the refractory fuel bed shapes.
To Clean the Pilot assembly . Remove the glass door as described above. Remove the log and
base ember shapes following the guidance on the set out below.
The pilot is located on the left hand front of the appliance, remove any debris in or around the
pilot head and the aeration hole. This can be achieved using the nozzle of a vacuum cleaner. It
is advisable not to blow the debris within the pilot head as this may cause more of a restriction
and not rectify the problem.
Note-Take care when cleaning in this area so as not to damage the pilot assembly.
Cleaning the fuel bed shapes. (Please refer to customer protection information on page 3 of this
booklet before cleaning or replacing any refractory materials).
The fuel bed components are delicate and they should be handled with great care. They can
be brushed very gently with a soft brush to remove dust or any deposits. A vacuum cleaner may
only be used after the loose components and molded shapes have been removed from the
Panache 8040 fire box.
It is important that all fuel bed shapes are positioned as shown in these instructions.