Charlton & Jenrick INFINITY 800HD BF UBL, Инструкция для пользователя, установка и обслуживание

Страница: 22 / 44

22 LT 8381 (ISS 01)
800 HD B.F. with UBL INSTALLATION INSTRUCTION
Siting the Appliance (installation instructions)
GENERAL REQUIREMENTS
•
The flue and air duct length must be between 100mm to 600mm.
•
The fire is supplied with a standard pipe length of 600mm.
•
The flue and air duct must not have any bends.
•
The flue outlet must terminate on a suitable outside wall.
•
The minimum flue terminal clearances, which must be maintained, are as shown below.
A. Directly below an openable window or other opening. E.g. air brick 300mm
B. Below gutters, soil pipes or drain pipes 300mm
C. Below eaves 300mm
D. Below balconies or carport roofs 600mm
E. From vertical drain pipes and soil pipes 75mm
F. From internal and external corners 300mm
G. Above ground, roof or balcony level 370mm
H. From a surface facing the terminal 600mm
I. From a terminal facing the terminal 1200mm
J. From an opening in a car port into a dwelling e.g. door, window, etc 1200mm
K. Vertically from a terminal on the same wall 1500mm
L. Horizontally from a terminal on the same wall 300mm
Please note :- The minimum depth requirement may well be difficult to obtain. This could result in the need for
the firebox to be spaced further from the internal surface of the plaster and to achieve this larger rebated
surround maybe necessary.