Charlie Lab Megabeat One, Руководство пользователя

Страница: 31 / 66

4.4.1 CHOOSING A GROUP
When you have access the GROUP PLAY mode, the display shows the groups
stored by the user in the hard disk or those automatically created by Megabeat One
when loading a floppy disk (see UTILITY mode).
N
OTE
Another group, called USER GRP, is always active in the main page of GROUP
PLAY mode. This group is automatically created by Megabeat One, by using the
songs selected in SINGLE PLAY mode.
If no song has been selected in SINGLE PLAY mode, USER GRP is empty.
In practice, unlike the groups created by the user or those automatically
created by Megabeat One when loading the songs contained in a floppy (see COPY
SONG function in UTILITY menu), which are always stored in hard disk, the USER
GRP group is present in RAM.
S
UGGESTION
Being present in RAM, the USER GRP content is lost when Megabeat One is
switched off. If you want to save USER GRP on hard disk, it is necessary to use the
functions of the EDIT GROUP menu (in UTILITY mode).
In order to choose a group, just use the CURSOR buttons or the PAGE/VALUE
Dial to indicate the desired group and then use the cursor buttons as described for
song selection in SINGLE PLAY mode.
4.4.2 PERFORMING THE SONGS OF A GROUP
Before performing the songs of a group, you can choose whether to perform
the songs in sequence, one after the other, or, at the end of a song, manually
activate the passage to the next one.
This option can be chosen with the LOOP/NOLOOP soft key. The value of
the actual option is shown at the bottom of the display, on the left. By pressing the
31
M
EGABEAT
O
NE
U
SER
M
ANUAL