Charlie Lab Megabeat One, Руководство пользователя

Страница: 25 / 66

◆ RESTOR: “clears” all the changes carried out by the user on the parameters
and retrieves the values originally stored in the song.
◆
SAVE: saves the changes carried out by the user.
◆
RELOAD: retrieves the values stored by the user with the SAVE function.
◆
EXIT: allows you to go back to the main page of the SINGLE PLAY mode.
◆ MUTE: mutes a track (turns the volume of the corresponding MIDI channel
to the minimum).
N.B.
All variations carried out by means of the ADJUST function do not change at
all the parametres stored in a song.
To understand how the ADJUST function acts on the song, you can imagine a
kind of table connected to the song itself, where all changes carried out by the user
on the song’s original values are stored.
For example, let’s imagine to have a song whose volume in the MIDI
channel number 2 has been recorded as follows:
■
first measure (beat 1.1), volume setting = 100;
■ tenth measure (beat 10.1) volume setting = 110.
When a song is being played, we’ll read “value 100” until the tenth
measure and “value 110” after the tenth measure on the Megabeat One’s display
(near the volume of the MIDI channel number 2).
Let’s now imagine to change the volume of the channel 2 with “-020” by
using the PAGE/VALUE Dial (and to store the change by using the SAVE soft key).
When the song is being played again, we’ll read the value “080” untill the tenth
25
M
EGABEAT
O
NE
U
SER
M
ANUAL
CHANNEL VOLUME ADJUST: +ØØØ
1
1Ø
9
1ØØ
RESTOR SAVE RELOAD MUTE EXIT
TEMPO Ø97 REV CHOR TRAN Ø
GLOBAL PARAMETERS ADJUST
2
12
1Ø
127
3
1ØØ
11
1ØØ
4
1ØØ
12
1ØØ
5
Ø85
13
1ØØ
6
1ØØ
14
1ØØ
7
11Ø
15
1ØØ
8
1ØØ
16
1ØØ