LT-IMCHRGR120-1
Issue 1 Print 2
12
Copyright 2013 Charles Industries, Ltd. All rights reserved. Printed in the United States of America.
Setup Types
There are two basic types of setup selections as described below.
Table 3. Setup Types
Setup Type
Display Output
Type 1 − Selectable Selection Setup:
This type of setup allows the user to select a specific option.
Example would be 12 or 24 VDC output. Use the UP/DOWN
arrow keys to move the small battery icon to the desired
selection. Use the ENTER (
↵
) button to move to the next set-
up category. Use the SILENCE (
←
) button to move to the pre-
vious setup category.
Selected Value: 12V
Type 2 − Variable Selection Setup:
This type of setup allows the user to select a desired opera-
tion from a large range. Example would be maximum output
amperage. Use the UP/DOWN arrow keys to select the de-
sired value from the range shown. The current value is
shown on the right and an analog range percentage bar is
shown on the bottom. Hold the UP/DOWN arrows for repeat
action. Use the SILENCE (
←
) button to move to the previous
setup category. Use the ENTER (
↵
) button to move to the
next setup category. OFF and NOW are available on some
categories. If available on certain categories, the OFF can be
reached by pressing the DOWN button until “OFF” appears on
the right side. Similarly, NOW can be reached by pressing the
UP button until “NOW” appears on the right side.
Range:
Current Value: 22 amps
5 to 40 amps
Procedure for Setup Mode
Setup the system by pressing ENTER (
↵
). This will turn the charger’s output to OFF while the
system is in Setup mode. Once Setup Mode is complete, the charger’s output will automatically
restart.
Enter the password (if enabled). Use the UP/DOWN arrow keys to select number, hit enter key to
advance.
The first menu displays a summary of all four banks. Each bank may be set for 12V (12V mode), 24V
(24V mode) or off. After a few moments, the display will switch to the bank’s battery type: FBO (Fixed
Bank Output), LA (Lead Acid), NCD (NiCad), AGM, GEL. Select “EDIT” to change any bank’s
parameters. Select “NEXT” to change general charger features.
When editing each bank, the menu displays the 12/24 VDC battery output selection menu. Using the
Up/Down arrow keys as explained in a Type 1 selection above, select the desired output voltage.
Press ENTER (
↵
) to advance to the next menu.
The second menu displays the Battery Type selection menu. There are 4 battery types and a fixed
bank output mode with only 2 types shown at a time. Use the Up/Down arrow keys to select the
desired battery types. Note the small arrow on the display indicates the direction of the other hidden
battery types. Press ENTER (
↵
) to advance to the next menu. See note on fixed bank output later in
this manual.
Note:
Fixed Bank Output mode is only available on Bank #1.
