C6050A, C6050B
v2.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~15S LiPo/LiFe battery
1~55Amps 3050W max.
www.chargery.com
page
8
total
19
Remote control charge Mode
COM1:
connect to Chargery BMS, the charge current
will be controlled by BMS when any cell voltage reach
OVP.
COM2:
connect to external device. The charge current
can be controlled by remote signal. The signal should
be 1KHz 5V or 3.3V square wave.
Note:
1.
To realize remote control charge by external device, please purchase C6050A.
2.
If don’t connect external device, the charger can be operated by manual, if connect the external
device on COM2, and send a suitable signal, after press Knob for 3 seconds start to charge, the
charge current will be adjusted according to external signal. External signal can turn off charge
(charge current is zero, the charge status display KEEP), and control charge current at range 1A to
55A.
Warning
PWM signal adjust charge current, increase or decrease 10% maximal each
time per one second.
