C6050A, C6050B
v2.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~15S LiPo/LiFe battery
1~55Amps 3050W max.
www.chargery.com
page
6
total
19
7.
Setup the charger work at Auto mode (only for C6050B)
,
Finish all charge settings, set up
Auto Charge is YES
and press
Knob for 3 seconds, the charger will start to charge, and work at
Auto mode next time till disable it.
When the charger work at Auto mode, what you need to do is
connect the AC power source and battery to the charger. The
charger will operate at last settings.
On Auto interface, press Knob for 3 seconds alternate to Idle mode.
If need not charge as last settings, pleaser set up Auto Charge is NO
8.
During charge, many charge information is displayed as below
9.
Similar with LiPo charge setup, you can setup LiIo, LiFe, LiTo, Pb battery and NiMH/NiCd.
10.
At any time Press
knob
shortly stop charging. The charger will work at idle mode to save power
consumption. Generally you needn’t disconnect it from AC outlet, because it only consume under
1W power at idle mode.
Battery voltage
Charge current
Capacity charged
Charge time
Internal temperature
Cell count, Battery Type, Charge status
