Chargery BMS24T Series, Руководство пользователя

Страница: 9 / 41

LiPo & LiFe, LiTo Battery Management System BMS24T V4.0
www.chargery.com page 9 total 41
NOTE: Please keep the default setup unless for special purpose.
Parameters Min. Type Max. Step unit
Charge Protection
Over Charge Protection(P) Voltage
LiPo 3.90 4.20 4.35 0.01 V
LiFe 3.40 3.65 3.90 0.01 V
LiTO 2.50 2.75 2.80 0.01 V
Over Charge Release(R) Voltage
LiPo 3.80 4.10 4.25 0.01 V
LiFe 3.30 3.55 3.80 0.01 V
LiTO 2.40 2.65 2.70 0.01 V
Over Charge current
0 50 600 1 A
Discharge Protection
Over Discharge Protection(P) Voltage
LiPo 2.75 3.00 4.00 0.01 V
LiFe 2.00 3.00 3.50 0.01 V
LiTO 1.50 1.85 2.40 0.01 V
Over discharge Release(R) Voltage
LiPo 2.75 3.20 4.00 0.01 V
LiFe 2.00 3.10 3.50 0.01 V
LiTO 1.60 1.95 2.50 0.01 V
Over Discharge current
0 300 600 1 A
SOC--- Battery gauge
5 20 90 1 %
Temperature Protection
High Temperature cut off
30 50 80 1
℃
Difference(Diff) of battery Temperature(Temp)
5 10 30 1
℃
Voltage balance Protection
Difference(Diff) of cell voltage
5 30 300 1 mV
Others
Temperature Unit
℃ ℉
Key Beeper
ON OFF
LCD Back-Light time
(1)
1 10 999 1 min
Cut-Off Delay Time
(2)
0 10 60 1 Second
Current Calibration
(3)
0 0 255 5 A
Temperature Alarm
(4)
ON OFF
Cell Empty Voltage
(5)
1.50 2.50 4.34 0.01 V
Cell Full Voltage
(5)
1.51 4.20 4.35 0.01 V
Default settings Press SET/START restore all factory defaults
Balance Parameter setup: Press SET/START to setup and press for 3 seconds quit setup
Balance Start Voltage
(6)
LiPo
3.3 3.6 4.1 0.01 V
LiFe
3.0 3.2 3.4 0.01 V
LiTO
1.75 2.20 2.6 0.01 V
Balance Stop Diff Voltage
(7)
5 12 200 mV
Balance in Charge
ON means Balance start during charge, OFF disable.
Balance in Discharge ON means Balance start during discharge, OFF disable.
Balance
(8)
in Storage
ON means Balance start during storage, OFF disable.