Charger HydroSplash CWISO475CHPL, Инструкция для владельца и по установке

Страница: 9 / 24

– 5 –
2.4 Installation of Non-UPC drain connection (Figure 4)
Place the drain outlet saddle on the drain pipe. Allow proper space for the
drilling operation. Tighten the saddle bolts evenly on both sides. Using the
opening in the drain outlet saddle as a guide, drill a 1/4" hole in the drain pipe.
Clean any debris out of the drain saddle connection.
Figure 4
2.5 Installation of clean water faucet
The faucet should be positioned with aesthetics, function, and convenience
in mind. An ample flat area is required for the faucet base so that it can be
drawn down tight. The space under the sink below where the faucet will be
mounted must be clear of any obstructions.
Some conditions may eliminate the need to drill a hole in the sink such as a faucet
previously installed in the sink, a hole covered by a chrome hole cover, or an
unused spray handle. If any of these situations are present, you may mount the
faucet in one of these holes.
The sink drilling process is not complicated, but requires a certain amount
of caution and forethought. Porcelain sinks can be chipped if care is not
exercised when drilling the hole for the faucet.
Alternate drain connection where UPC is not required
Vertical Mount
Horizontal Mount
Disposal
Do not
mount here
Sink Sink
Maximum Displacement
from Top Center - 30”
RO Drain Line
Foam
Sealing Washer
1/4” Tube (black)
Compression
Fitting